VigorSwitch P1280 (24-Port Web Smart Gigabit PoE Switch)

LAN Management
VigorSwitch P1280 offers features that help to build a secure business network, such as VLAN, Port Isolation, Storm Control, and DoS Defense. While allowing visitors to connect to the network for Internet access, these features help to block the visitors’ access to business network resources and protect the network from being exhausted by malicious traffic.

24 PoE+ Capable Ports
All the 24 Ethernet ports of VigorSwitch P1280 are compatible with 802.3at and 802.3af standard, provide up to 30W per port to network devices such as wireless access points, IP phones, and IP surveillance. This reduces the need for power cables and adapters, which lowers the cost of installation, as well as offers the flexibility to install those devices, not being limited by where the power outlets are.

The VigorSwitch P1280 helps you build a green networking by offering power-saving features, such as IEEE 802.3az (Energy-Efficient Ethernet), which allows the switch to dynamically adjust the power on each port according to the client activity and cable length, and PoE Scheduling allows you to schedule a power on/off on selected ports, to turn off the devices that are not in use and save electricity.

Voice VLAN to improve call quality
The Voice VLAN feature allows VigorSwitch P1280 to automatically identify the traffic from a VoIP device and assign their source port to a separate VLAN. This allows the switch to efficiently give VoIP traffic a higher priority over others, thus to ensure the best call quality.

Speed up the network by Link Aggregation
If cascading more switches are required, link aggregation will provide the network higher throughput and link redundancy. VigorSwitch P1280 supports link aggregation by both static configuration and LACP (Link Aggregation Control Protocol), up to 8 Link Aggregation Group can be set up on VigorSwitch P1280, and each of the group can have up to 8 port members.

Easy Setup & Monitoring
VigorSwitch P1280 has adopted a brand-new interface design which will make configuration and management much easier. The new dashboard shows the status of the system and each of LAN ports at a glance. Furthermore, the responsive web design allows Network Administrator to monitor the switch effortlessly via all kinds of devices. (Visit Live Demo)

VigorSwitch P1280 is compliant with Central Management feature of Vigor Router. It can be managed through the Vigor Router’s management page, this allows Network Administrator to configure, monitor, and maintain all the switches on the network easily from one single portal.

• Physical Interfaces:
  • 24 10/100/1000BaseT Ethernet Ports (RJ-45 IEEE 802.3/3u/ab)
  • 4 Selectable Ports (Nos. 25-28), use as either:
    • 10/100/1000BaseT (Gigabit) Ethernet or
    • SFP (802.3z)
• PoE Specification:
  • 24-ports 802.3af & 802.3at (high Power) PoE PSE
  • 340 Watts Total Power Budget for PoE
  • Auto Detection of Powered Device (PD) and Consumption Levels
  • PoE Activity LED Indicator
  • Supports per Port Power Consumption Monitoring
  • Smart Feature for PD on/off, PD Detection, Power Level, PD status and Power feeding Priority
  • Circuit Protection to Prevent Power Interference between Ports
  • Port PoE Priority automatically from 1 (highest priority) to 24 (lowest)
• VLAN:
  • 802.1q VLAN
    • Tag-based VLAN
    • Port-based VLAN
  • Up to 4K VLANs (out of 4096 VLAN IDs)
  • Protected Port
  • Voice VLAN (OUI Mode)
  • Management VLAN
• QoS:
  • Support 8 priority queues
  • Port-Based rate control
  • Priority queue schedule (WRR or Strict Priority)
  • Class of Service
    • 802.1p CoS
    • DSCP
    • CoS-DSCP
    • IP Precedence ToS
• Network Security:
  • Access Control Lists (ACL)
    • Source and destination MAC
    • VLAN ID
    • IPv4/v6 address
    • Protocol
    • TCP/UDP port
  • Storm Control (Broadcast, Unknown Multicast, Unknown Unicast)
  • DoS Attack protection
  • AAA Authentication
• Link Aggregation:
  • Combine multiple ports to increase bandwidth
  • 8 Aggregation Groups
  • Up to 8 ports in each group
  • LCAP or Static setup
  • Supports traffic load balancing
• Networking Performance:
  • Switching Capacity: 56Gbps
  • Forwarding Rate: 41.7Mpps
  • MAC Addresses Supported: 8K
  • Jumbo Frames up to 9KB
• IGMP Snooping:
  • Up to 256 multicast groups
  • IGMP Snooping V2/V3 (BISS)
  • IGMP V2/V3 Querier
  • Immediate Leave
• Management:
  • IPv4 & IPv6 Dual-Stack
  • Web User Interface (HTTP or HTTPS)
  • Firmware Upgrade/Backup by HTTP/HTTPS
  • HTTP (Non-TLS) can be disabled for increased security
  • Configuration Backup/Restore
  • Factory Default
  • System Reboot
  • LLDP(802.1ab)
  • Command Line Interface (CLI) via SSH/Telnet
  • DrayTek Switch Management support (from routers) *requires firmware update (est Q1 ’18)
  • VigorACS Compatible *requires firmware update (est Q1 ’18)
  • SNMP (with Generic Traps) & TR-069
• Diagnostics:
  • Port Status & Usage display
  • PoE active display
  • CPU/RAM Usage display
  • Event Log
  • Port Mirroring
  • Ping
  • Port-based cable test
• General IEEE Standards Compliance:
  • 802.3 10Base-T
  • 802.3u 100Base-T
  • 802.3ab 1000Base-T
  • 802.3x Flow Control Capability
  • 802.3 Auto-negotiation
  • 802.1Q VLAN
  • 802.1p Class of Service
  • 802.1d Spanning Tree
  • 802.1w Rapid Spanning Tree
  • 802.3ad Port trunk with LACP
  • 802.1AB Link Layer Discovery Protocol (LLDP)
  • 802.3az Energy Efficient Ethernet
• Operating Requirements:
  • Power Input Requirements: 220-240VAC
  • Power supply: Internal
  • Maximum Input Power Consumption: 453.3 Watts
  • Operating Temperature:~0°C to ~40°C
  • Storage Temperature:-20°C to ~70°C
  • Operating Humidity: 10% to 90% RH (non-condensing)
• Physical Specifications:
  • Dimensions: 441 x 270 x 45 mm (W x D x H)
  • Rack mountable: 1U
  • Brackets included for rack or wall mounting
  • Weight: 4.35Kg (excluding SFP modules/cables)
• ROHS & CE Compliant
• Warranty : 2 Year Manufacturer’s RTB

• VigorSwitch P1280
• Ethernet Cable
• Power adaptor

Next Day Delivery
For UK orders received before 12pm Monday to Friday, we operate a next business day delivery service, subject to availability. We use next day services from the leading delivery companies.

Specific Time Delivery
If you need an item urgently, or delivered at a specific time, please contact us.

Delivery Methods
We use several leading delivery companies. The majority of our deliveries are made by
DPD, including most international orders.

Shipping prices are calculated during the checkout process.
We deliver to almost every country. For international delivery services, we use DHL, a high quality, fast delivery service. Prices are provided based on the weight of the order; this is calculated when you reach the checkout.

For full shipping information please visit our shipping page.

Hosted Business VoIP Provider Unlimited Calls from £10/month
If you’re looking for a reliable and competitive VoIP provider for your small business, we can offer you one of the UK’s most trusted services. No need to compromise on quality, either. The capabilities of our VoIP PBX system have been developed over a decade, with our roadmap for the future incorporating even more improvements. Your business VoIP is in safe hands with us.

With SIP trunking, your business can operate its own on-site IP PBX system. Sipdesk has been offering our own SIP trunk solutions for over 10 years.

Business SIP trunking is a service that enables your company to operate a selection of telecommunications systems over your IP network. It offers a number of benefits – from cheaper international call costs to improved business flexibility. Incorporating a Disaster Recovery strategy to give access to an increased quantity of numbers, business SIP trunking from Sipdesk can enhance the way your business stays connected.