VigorSwitch P2280 PoE L2 Gigabit Switch

VigorSwitch P2280 is designed for SMB business network that runs various network applications. The 24 PoE+ Ethernet ports are perfect for a network with wireless AP, IP phones, and IP surveillance. VigorSwitch P2280 provides the auto Voice VLAN and QoS feature help to improve the VoIP call quality on the network. All the ports of VigorSwitch P2280 are capable of gigabit speeds, Link Aggregation can be set up to increase the throughput even more and build a more reliable network.

24 PoE+ Capable Ports
All the 24 Ethernet ports of VigorSwitch P2280 are compatible with 802.3at and 802.3af standard, and provide up to 30W per port to network devices such as wireless access points, IP phones, and IP surveillance. This reduces the need for power cables and adapters, which lowers the cost of installation, as well as offers the flexibility to install those devices, not being limited by where the power outlets are.

The VigorSwitch P2280 helps you build a green networking by offering power-saving features, such as IEEE 802.3az (Energy-Efficient Ethernet), which allows the switch to dynamically adjust the power on each port according to the client activity and cable length, and PoE Scheduling allows you to schedule a power on/off on selected ports, to turn off the devices that are not in use and save electricity.

Flexible VLAN Options
With VigorSwitch P2280, you may segment the physical local area network (LAN) into the smaller logical network (VLAN) and limits the traffic within that segment, this allows the administrator to control the LAN access and eliminates unnecessary network traffic. VigorSwitch P2280 supports various types of identifying the VLAN of traffic, including port-based, tag-based, protocol-based, and MAC-based. Voice VLAN and Surveillance VLAN are also supported so that traffic from an IP phone or an IP camera can be identified automatically without the need of specifying each of their MAC address. The respective QoS (Quality of Service) policy can be applied easily, so that the call and video quality can be optimized.

Network Security
To save the LAN bandwidth, VigorSwitch P2280 has integrated security features to prevent the local network being overloaded by superfluous traffic, such as Storm Control to limit the amount of broadcast and multicast traffic on each port, and DoS Defense to protect the network being flooded by malicious requests. And VigorSwitch P2280 provides methods to avoid IP conflicts, including IP Source Guard, ARP inspection, and DHCP Snooping. Moreover, VigorSwitch P2280 supports 802.1x port access control to block un-authorized users from connecting to the network.

Improving Performance by QoS
When the traffic is heavy on the LAN, QoS can improve the LAN network performance by allowing the critical or delay-sensitive traffic to pass first. VigorSwitch P2280 supports traffic classifying by 802.1p CoS, DSCP, and IP Precedence. VigorSwitch P2280 is especially ideal for a network which is going to deploy IP cameras and IP phones, with Auto Voice VLAN and Auto Surveillance VLAN feature, call and video traffic can be identified automatically and be assigned the desired class easily. On VigorSwitch P2280, you can have up to 8 traffic queues with customized weight.

Speed up the network by Link Aggregation
If cascading more switches are required, link aggregation will provide the network higher throughput and link redundancy. VigorSwitch P2280 supports link aggregation by both static configuration and LACP (Link Aggregation Control Protocol), up to 8 Link Aggregation Group can be set up on VigorSwitch P2280, and each of the group can have up to 8 port members.

Easy Setup & Monitoring
VigorSwitch P2280 has adopted a brand-new interface design which will make configuration and management much easier. The new dashboard shows the status of the system and each of LAN ports at a glance. Furthermore, the responsive web design allows Network Administrator to monitor the switch effortlessly via all kinds of devices. (Check the GUI of VigorSwitch P2280 from Live Demo). Command-Line Interface (CLI) is also provided via Telnet or SSH, and standard monitoring methods are supported including SNMP, RMON, and Syslog.

Central Management of Vigor Router
VigorSwitch P2280 is compliant with Central Management feature of Vigor Router. It can be managed through the Vigor Router’s management page, this allows Network Administrator to provision, configure, monitor, and maintain all the switches on the network easily from one single portal.

Physical Interfaces

• 24 10/100/1000BaseT Ethernet Ports (RJ-45 IEEE 802.3/3u/ab)
• 4 Selectable Ports (Nos. 25-28), use as either:
  • 10/100/1000BaseT (Gigabit) Ethernet
  • SFP (802.3z)
• Console Port

PoE Specification

• 24-ports 802.3af & 802.3at (high Power) PoE PSE
• 340 Watts Total Power Budget for PoE
• Auto Detection of Powered Device (PD) and Consumption Levels
• PoE Activity LED Indicator
• Supports per Port Power Consumption Monitoring
• Smart Feature for PD on/off, PD Detection, Power Level, PD status and Power feeding Priority
• Circuit Protection to Prevent Power Interference between Ports
• Port PoE Priority automatically from 1 (highest priority) to 24 (lowest)

VLAN

• 802.1q Tag-based VLAN
• Port-based and MAC-based VLANs
• QinQ (Basic)
• GVRP
• Up to 4K VLANs (out of 4096 VLAN IDs)
• 802.1v Protocol-Based VLAN
• Voice VLAN (OUI Mode)
• Surveillance VLAN (OUI Mode)
• Protocol VLAN
• MAC-based VLAN
• Management VLAN

QoS

• Support 8 priority queues
• Port-Based rate control
• Priority queue schedule (WRR or Strict Priority)
• Class of Service
  • 802.1p CoS
  • DSCP
  • CoS-DSCP
  • IP Precedence ToS

Network Security

• Access Control Lists (ACL)
  • Source and destination MAC
  • VLAN ID
  • IPv4/v6 address
  • Protocol
  • TCP/UDP port
• IP Source Guard
• Storm Control (Broadcast, Unknown Multicast, Unknown Unicast)
• DoS Attack protection
• AAA Authentication
• Protected Port

Link Aggregation

• Combine multiple ports to increase bandwidth
• 8 Aggregation Groups
• Up to 8 ports in each group
• LCAP or Static setup
• Supports traffic load balancing

Networking Performance

• Switching Capacity: 56Gbps
• Forwarding Rate: 41.7Mpps
• MAC Addresses Supported: 8K
• Jumbo Frames up to 9KB

Multicast

• Up to 256 multicast groups
• IGMP Snooping V2/V3 (BISS)
• IGMP V2/V3 Querier
• Filtering / Throttling
• MLD Snooping V1/V2
• Immediate Leave
• Multicase VLAN registration

AAA

• 802.1x – Single / Multiple
  • Port based
  • Mac Based
• Guest VLAN
• External AAA server using RADIUS / TACACS

Management

• IPv4 & IPv6 Dual-Stack
• Web User Interface (HTTP or HTTPS)
• Firmware Upgrade/Backup by HTTP/HTTPS
• HTTP (Non-TLS) can be disabled for increased security
• Configuration Backup/Restore
• Factory Default
• System Reboot
• LLDP(802.1ab) + MED
• DHCP Snooping with Option 82
• Command Line Interface (CLI) via SSH/Telnet
• Console Port (RJ45)
• DrayTek Switch Management support (from routers)
  • Note: requires firmware update (est Q1 ’18)
• VigorACS Compatible
  • Note: requires firmware update (est Q1 ’18)
• SNMP (with Generic Traps) & TR-069

Diagnostics

• Port Status & Usage display
• PoE active display
• CPU/RAM Usage display
• Event Log
• Port Mirroring
• Ping
• Port-based cable test

General IEEE Standards Compliance

• 802.3 10Base-T
• 802.3u 100Base-T
• 802.3ab 1000Base-T
• 802.3x Flow Control Capability
• 802.3 Auto-negotiation
• 802.1Q VLAN
• 802.1p Class of Service
• 802.1d Spanning Tree
• 802.1w Rapid Spanning Tree
• 802.1s Multiple Spanning Tree
• 802.3ad Port trunk with LACP
• 802.1AB Link Layer Discovery Protocol (LLDP)
• 802.3az Energy Efficient Ethernet

Operating Requirements

• Power Input Requirements: 220-240VAC
• Power supply: Internal
• Maximum Input Power Consumption: 453.3 Watts
• Operating Temperature:~0°C to ~40°C
• Storage Temperature:-20°C to ~70°C
• Operating Humidity: 10% to 90% RH (non-condensing)

Physical Specifications

• Dimensions: 441 x 270 x 45 mm (W x D x H)
• Rack mountable: 1U
• Brackets included for rack or wall mounting
• Weight: 4.35Kg (excluding SFP modules/cables)

• Draytek VigorSwitch P-2280
• Ethernet Cable
• Rack Mounting Kit

Next Day Delivery
For UK orders received before 12pm Monday to Friday, we operate a next business day delivery service, subject to availability. We use next day services from the leading delivery companies.

Specific Time Delivery
If you need an item urgently, or delivered at a specific time, please contact us.

Delivery Methods
We use several leading delivery companies. The majority of our deliveries are made by
DPD, including most international orders.

Shipping prices are calculated during the checkout process.
We deliver to almost every country. For international delivery services, we use DHL, a high quality, fast delivery service. Prices are provided based on the weight of the order; this is calculated when you reach the checkout.

For full shipping information please visit our shipping page.

Hosted Business VoIP Provider Unlimited Calls from £10/month
If you’re looking for a reliable and competitive VoIP provider for your small business, we can offer you one of the UK’s most trusted services. No need to compromise on quality, either. The capabilities of our VoIP PBX system have been developed over a decade, with our roadmap for the future incorporating even more improvements. Your business VoIP is in safe hands with us.

With SIP trunking, your business can operate its own on-site IP PBX system. Sipdesk has been offering our own SIP trunk solutions for over 10 years.

Business SIP trunking is a service that enables your company to operate a selection of telecommunications systems over your IP network. It offers a number of benefits – from cheaper international call costs to improved business flexibility. Incorporating a Disaster Recovery strategy to give access to an increased quantity of numbers, business SIP trunking from Sipdesk can enhance the way your business stays connected.